• Must use the power supply specified by the manufacturer. It is strictly forbidden to use unmatched voltage.
  • When installing the sample to be tested, it must be mounted firmly. Place the package in the center as much as possible. If the sample is found to be unclamped during the test, it should be re-clamped after stopping the machine. Operation is strictly prohibited when the machine is not stopped.
  • The bottom area of the carton sample cannot exceed the edges of the work table.
  • The weight of the test sample should not exceed the maximum load. If with long-term overload use, It may lead to failure and shortened life of the testing machine.
  • Adjust the speed governor to the “0” position before starting to prevent the circuit from burning out. After turning on the power, slowly rotate the frequency adjustment knob to make the table reach the required oscillation frequency.
  • This transportation vibration tester is a used to test on the packaging box after the product is packaged. Do not directly perform the product vibration test to avoid scratching and damaging the sample.
  • The control box is a power control component and must not bear heavy objects and severe vibration.
  • Both the control box and the table have heat dissipation holes, which should not be blocked by any objects and debris.
  • When the machine is found to have abnormal sound during operation, immediately stop it for inspection, or contact us for handling before it continue to run.