Spectacle Frame Spring Hing Durability Tester China factory and Supplier
Hinge Cycle Tester is also called the Spring Hing Durability Tester. It is used to determine the durability of the spectacle frame spring hinges and temples subjected to a specified number of repeated bends through a given angle.
The simulation behaviours using this tester allow you to inspect and master the elasticity change of the sprung joints during actual use and the ability to resist repeated opening and closing of the temple, which also has a positive effect on material selection and quality control.
Eyeglass Sprung Joint Durability Test Principle
The rim portion of the spectacle frame specimen is fixed in a horizontal fixture. The temples face upwards, and both temple tips are restricted in the corresponding oscillating holders. After the machine is started, the temples of the sample are opened and closed repeatedly through a prescribed angle(s) until the preset number of cycles is reached. The test result is determined by checking elasticity changes and whether the spring hinge remains as it is.
Description for the Frame Durability Tester
Our spectacle frame spring hinge cycle tester features a PLC to run automatically for 4 swing arms according to your settings. Coupled with an LCD touch screen, It allows you to input the oscillation speed, the number of oscillations, interval, and forward and backward bending angle of a single swing arm based on the testing requirements. The swing arm supports front and back angles settings for the bending from -180° to 180°, which can satisfy all requirements for swing angles.
There are 2 workstations in this hinge cycle tester to accommodate 2 samples for testing simultaneously. Samples without rims are also accepted with the help of special auxiliary devices. Each station operates independently relative to the other. You can set their parameters individually and actuate either one or both to work at the same time. The test run can be automatically stopped as preset or manually suspended anytime for sample inspection.
For other spectacle frame testing devices, please go Here to learn more.
2 work stations
Main Technical Parameters
| Model | AT-DR3001 |
| Control mode | PLC + Touch screen |
| Work stations | 2 |
| Counter | 0~999,999,999 adjustable |
| Oscillating angles of each swing arm | Front angle: -180° to 180° adjustable
Rear angle: -180° to 180° adjustable |
| Test speed | 0~50 cpm |
| Interval between each bend | 0~10 s adjuatable |
| Dimensions | 45 mm (W) × 47 mm (D) × 56 mm (H) |
| Power supply | AC 220 V 50 Hz / 110 V 60 Hz |
Hinge Cycle Tester Features
- Made of quality steel and the surface is coated with stoving varnish.
- Comes with the control mode of PLC plus a touch screen.
- Test parameters tailored to your needs are available.
- The operations of the 2 stations are separate from each other.
- Related parameters in real-time are displayed on the screen for monitoring.
- It can accept different sizes of spectacle samples.
- Equipped with a plastic cover to protect operators throughout the test.
- An emergency switch is available.
- High durability and low noise.
Request a Quote Now
Please feel free to contact us for more details on the product, price, lead time, payment terms, shipment methods, etc. Amade Tech sales engineers will respond within one working day.
